Awards & Nominations
Protagonist has received the following awards and nominations. Way to go!
Global Nominee
2- Dimension Computational Analysis of FGM Coatings
High-Level Project Summary
Development of FGM coating using HVOF on cast iron and steel substrate for cylinder liners of internal combustion engines to characterize the developed coatings using techniques like Optical microscopy and Hardness test. We had selected these three materials for coating i.e. firstly WC+Co , secondly, the coating material is WC+Co+Cr, and the third coating material is Ni+Al.After that, we'll do the coating process using simulation modeling, and then representing the design using 2D, 3D tools to develop the virtual model. After that, we perform finite element analysis, review results, and make engineering judgments based on results.
Link to Project "Demo"
Link to Final Project
Detailed Project Description
- Work and Functions
- Optimize geometry for weight and strength.
- Select materials that meet weight, strength, and budget requirements.
- Simulate part failure and identify the loading conditions that cause them.
- Assess extreme environmental conditions or loads not easily tested on physical prototypes, such as earthquake shock load.
- Verify hand calculations.
- Validate the likely safety and survival of a physical prototype before simulation modeling follows a process much like this.
After all the processes, we have done the final modeling and simulation, along with temperature distribution and heat-flux distribution.
- Benefits of this project
- FGM processes are manual, so it needs improvements to make it full automation so as to
improve the overall performance of the process, reduce the cost and improve the
reliability.
- Most of the researches has focused on the properties of FGM without taking into account
the environmental effect (deformation, temperature, etc.). Moreover, few researchers
discussed only the simple cases, like the transverse shear or the transverse normal
deformation. The real situation, however, is usually a complex case. -e more general and
complex cases should be concerned as well.
- Although numerous applications of FGM exist in aerospace, defense, nuclear,
automobile, and other industries, FGM has a vital role in the medical field as well.
Keeping awake glance of this noble application for the betterment of human beings, more
in-depth investigation needs to be done on FGM with respect to Advances in Materials.
Science and Engineering to health care such as bone implantation, dentistry, etc.
- Software used in this project- Ansys19.2
Space Agency Data
Yes it inspired a lot . And give so much of knowledge
Hackathon Journey
It was a very nice experience with my team member .
I will like to thank space app challenge maker so that we can use our knowledge in the project
A very memorable experience
References
1. Rasheedat M. Mahamood, Esther T. Akinlabi, Functionally Graded Material: An Overview, Proceedings of the World Congress on Engineering 2012 Vol III WCE 2012, July 4 – 6, 2012, London, U.K.
2. William G. Cooley, A THESIS REPORT ON APPLICATION OF FUNCTIONALLY GRADED MATERIALS IN AIRCRAFT STRUCTURES
3. Functionally Graded Material Fabricated by a Centrifugal Method from ZK60A Magnesium Alloy – Yoshimi Watanabe1;*1,*2, Ryuho Sato1;*3 Variation of along the y axis in orthotropic FGM plate under biaxial tension Soo Kim1, Seiji Miura2, and Hiromi Miura3
4. X. Lin and T. M. Yue Phase formation and microstructure evolution in laser rapid forming of graded SS316L/Rene88DT alloy, Mater Sci Engng, vol. A402, (2005), pp.294-306
5. S. Matsuo, F. Watari, and N. Ohata, Fabrication of functionally graded dental composite resin post and core by laser lithography and finite element analysis of its stress relaxation effect on the tooth root, Dental Mater J, vol.20(4), (2001), pp. 257274.
6. Udupa, G.; Rao, S.; and Gangadharan K. (2014). Functionally graded composite materials: an overview. Procedia Materials Science, 5, 1291-1299.
7. Zhang, B.; Jaiswal, P.; Rai, R.; and Nelaturi, S. (2018). Additive manufacturing of functionally graded material objects: a review. Journal of
Computing and Information Science in Engineering, 18(4).
8. Li, Q.; and Xu, X. (2015). Self-adaptive slicing algorithm for 3D printing of
FGM components. Materials Research Innovations, 19(5).
9. Naebe, M.; and Shirvanimoghaddam K. (2016). Functionally graded materials:
a review of fabrication and properties. Applied Materials Today, 5, 223-245.
10. Ngo, T.; Kashani, A.; Imbalzano, G.; Nguyen, K.; and Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications, and challenges. Composites Part B: Engineering, 143, 172-196.
SOFTWARE: ANSYS19.2
Tags
#materialscience, #materialcoatings #ansyssoftware